どこにでもいるような普通の一般人が、たまに自分用メモを書いてる。

富士通 FUTRO ME734

スペック FUTRO ME574
CPU Intel Celeron 2950M 2GHz (2C2T)
メモリ DDR3L SO-DIMM 2GB
ストレージ 2.5インチ SATA
OS

ノート PC 型シンクライアント。

lspci

00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
00:02.0 VGA compatible controller: Intel Corporation Haswell Integrated Graphics Controller (rev 06)
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 04)
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
00:19.0 Ethernet controller: Intel Corporation Ethernet Connection I217-V (rev 04)
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d4)
00:1c.5 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #6 (rev d4)
00:1c.7 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #8 (rev d4)
00:1f.0 ISA bridge: Intel Corporation HM86 Express LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 04)
02:00.0 Network controller: Qualcomm Atheros AR9462 Wireless Network Adapter (rev 01)
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227 PCI Express Card Reader (rev 01)

CPU

  • Intel Celeron 2950M 2GHz (2C2T)
/proc/cpuinfo

processor	: 0
vendor_id	: GenuineIntel
cpu family	: 6
model		: 60
model name	: Intel(R) Celeron(R) CPU 2950M @ 2.00GHz
stepping	: 3
microcode	: 0x1c
cpu MHz		: 798.369
cache size	: 2048 KB
physical id	: 0
siblings	: 2
core id		: 0
cpu cores	: 2
apicid		: 0
initial apicid	: 0
fdiv_bug	: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 13
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg cx16 xtpr pdcm sse4_1 sse4_2 movbe popcnt xsave rdrand lahf_lm abm cpuid_fault epb tpr_shadow vnmi flexpriority ept vpid ept_ad fsgsbase tsc_adjust erms invpcid xsaveopt dtherm arat pln pts
vmx flags	: vnmi preemption_timer invvpid ept_x_only ept_ad ept_1gb flexpriority tsc_offset vtpr mtf vapic ept vpid unrestricted_guest ple
bugs		: cpu_meltdown spectre_v1 spectre_v2 spec_store_bypass l1tf mds swapgs itlb_multihit srbds
bogomips	: 3990.81
clflush size	: 64
cache_alignment	: 64
address sizes	: 39 bits physical, 48 bits virtual
power management:

メモリ

  • DDR3L 1600MHz SO-DIMM 2スロット

メーカー公式の上限は 4GB だが、実際はたぶん 8GB 2枚の 16GB と思われる。

ストレージ

  • 2.5インチ SATA 1スロット

このほか光学スリムドライブも搭載可能になっているようだ。

OS

Windows Embedded Standard 7 (WES7E) のシールが貼付されている。

電源

AC アダプターは 19V 3.42A、プラグ外径 5.5mm 内径 2.5mm。

ディスプレイ

13.3インチ HD 液晶ディスプレイ。

分解

メモリと SSD の交換は窓が設けられているので、それを開けるだけ。

本格的な内部へのアクセスは以下の手順。

  1. バッテリーを外す。
  2. SSD 窓を開けて SSDを取り出し、その下にあるネジ2本を外す。
  3. 光学スロットカバーを外し、その下にあるネジ2本を外す。
  4. 底面のネジ11本を外す。
  5. キーボードを外す。裏面が両面テープで貼り付けられているので、縁からこじってめくり上げる感じ。
  6. キーボードのフレキを抜く。
  7. スピーカーのケーブル、タッチパッドのフレキ、あともう1本 (たぶん電源ボタン) フレキを抜く。
  8. キーボード下のネジ2本を外す。
  9. キーボード・タッチパッド面を外す。

キーボードは底面中央のネジ1本と両面テープで固定されている。
SSD 下と光学スロットカバー下のネジを外さないと、キーボード・タッチパッド面は外れない。

comments powered by Disqus